All In MedTech

Regulatory pathways

FDA device classes (I, II, III) and product codes explained

FDA device classification explained: what Class I, II and III mean, how general and special controls work, and how to read an FDA product code.

By the All In MedTech editorial team · Published November 19, 2026 · 6 min read

FDA sorts every medical device type into one of three classes by the level of control needed to give reasonable assurance that it is safe and effective. Class I devices are subject to general controls only, Class II devices also need special controls, and Class III devices need premarket approval. Each device type also has a three-letter product code that ties it to its classification regulation, review panel and usual premarket pathway.

The class decides most of what a manufacturer has to do before and after launch, and the product code is how FDA's databases, and this site, group devices together. This post explains both.

The classes come from section 513 of the Federal Food, Drug, and Cosmetic Act, added by the Medical Device Amendments of 1976. FDA's definitions are in 21 CFR 860.3. In plain terms:

  • Class I: general controls alone are sufficient, or there is not enough information to set special controls but the device is not life-supporting or life-sustaining and does not present a potential unreasonable risk of illness or injury.
  • Class II: general controls alone are insufficient, and there is enough information to establish special controls that provide reasonable assurance of safety and effectiveness.
  • Class III: there is not enough information to show that general or special controls would be sufficient, and the device is life-supporting or life-sustaining, is of substantial importance in preventing impairment of human health, or presents a potential unreasonable risk of illness or injury.

The definitions are about controls, not about danger in the abstract. A Class III device is one where FDA needs to review the specific evidence for that device before it is sold.

General controls and special controls

General controls apply to every device, whatever its class. Under the regulation they come from the provisions of the Act on adulteration, misbranding, establishment registration and device listing, premarket notification, banned devices, notification and repair, records and reports (including unique device identification), and general provisions such as good manufacturing practice. Day to day, this means registering the facility, listing the device, labeling it properly, following quality system requirements, and reporting adverse events.

Special controls are added for Class II device types. The regulation describes them as including performance standards, performance testing, postmarket surveillance, patient registries, guidelines and other appropriate actions. For a given device type, special controls are written into its classification regulation, often as a list of required tests and labeling statements. A 510(k) for a Class II device usually has to show that it meets them.

How class maps to the premarket pathway

ClassControlsTypical premarket route
Class IGeneral controlsMost types exempt from 510(k); some require one
Class IIGeneral and special controlsUsually 510(k); some types exempt; new types via De Novo
Class IIIGeneral controls and premarket approvalPMA (or HDE for small populations)

There are exceptions in both directions. Some Class I types are reserved and still need a 510(k), many Class II types are exempt, and a few older Class III types were historically cleared by 510(k) until FDA called for PMAs. Exemptions have limits set out in the ".9" section of each classification part, so a device that differs from others of its type in intended use or fundamental technology can still need a submission. For the pathways themselves, see 510(k) vs De Novo vs PMA.

Classification regulations and panels

FDA's classifications are published as regulations in 21 CFR Parts 862 to 892. FDA says it has classified roughly 1,700 generic device types and grouped them into 16 medical specialty panels, such as cardiovascular, orthopedic, radiology and general hospital devices. Each panel has its own CFR part.

A classification regulation number has a part and a section. In 21 CFR 870.1250, for example, Part 870 is the cardiovascular devices part and section 1250 is the regulation for percutaneous catheters. The regulation names the device type, describes it, states its class, and lists any special controls or exemptions. Several product codes can sit under one regulation when FDA wants to track variations of a device type separately.

What a product code is

A product code is a three-letter identifier FDA assigns to a generic type of device. It is what manufacturers use when they list devices with FDA, and it is printed on 510(k), De Novo and PMA records. Each product code record in FDA's product classification database shows:

  • the device name,
  • the classification regulation number, if there is one,
  • the device class,
  • the review panel,
  • the usual submission type (510(k), PMA, De Novo, exempt and so on),
  • whether the type is exempt from 510(k) or from parts of the quality system requirements, and
  • any recognized consensus standards and guidance documents FDA links to it.

Some real examples from FDA's data:

  • DQY, catheter, percutaneous: Class II, cardiovascular panel, regulation 21 CFR 870.1250, 510(k) required.
  • DXY, implantable pacemaker pulse-generator: Class III, cardiovascular panel, regulation 21 CFR 870.3610.
  • QAS, radiological computer-assisted triage and notification software: Class II, radiology panel, regulation 21 CFR 892.2080.

Product codes for many PMA devices have no regulation number. When a Class III device type has never been classified by regulation, for example because it is a post-1976 device that defaulted to Class III, the product code exists but points to no CFR section. In the copy of FDA's classification file this site loaded on November 11, 2026, there were 7,098 product codes: 2,403 in Class I, 3,646 in Class II, 529 in Class III, and the rest unclassified or carrying other designations. Those totals count product codes, not individual devices or decisions.

Why product codes matter beyond FDA

Product codes are the most practical way to group devices in public data:

  • Competitor mapping. Every 510(k), De Novo and PMA decision under a product code is a competing or related device.
  • Predicate searching. Sponsors look under a product code for cleared devices with the same intended use. See what is a 510(k).
  • Safety signals. MAUDE adverse event reports and recalls carry product codes, so you can compare the report volume for a device type against how many devices are on the market. The site's MAUDE signals page does this.
  • New categories. When FDA grants a De Novo request, it creates a new regulation and a new product code, so the first appearance of a code often marks a new category. See the De Novo pathway explained.

How classification changes

Classes are not permanent. FDA can reclassify a device type, up or down, through a proposed and final order under section 513(e) of the Act, usually after new information about its risks or benefits emerges. A manufacturer can also petition for reclassification. Over the years FDA has moved a number of device types from Class III to Class II with special controls, and has exempted many Class I and II types from 510(k).

If a sponsor is not sure how its device would be classified, it can submit a 513(g) request for information, and FDA responds in writing with its view of the classification and applicable requirements. A Pre-Submission meeting is the other common route for an early read.

What device class does not tell you

Class is a regulatory category for a device type. It is not a rating of any individual product, a measure of quality, or a prediction of how often problems occur. A Class II device can have a serious recall, and a Class III device can have an excellent record. To judge a specific product, look at its clearance or approval record, its labeling, its adverse event reports in MAUDE, and its recall history, all of which you can reach from /devices.

FDA's Classify Your Medical Device page is the official guide to finding a device's classification and the regulation that governs it.

Frequently asked questions

What are the three FDA device classes?
Class I devices are subject to general controls only, Class II devices need general and special controls, and Class III devices need premarket approval because those controls are not enough to provide reasonable assurance of safety and effectiveness.
What is an FDA product code?
It is a three-letter code FDA assigns to a generic type of device, linking it to a classification regulation, device class, review panel and usual submission type.
Is a Class II device safe?
Device class reflects the level of regulatory control FDA considers necessary for a device type, not a safety rating for an individual product.
How do I find a device's classification?
Search FDA's product classification database by device name or product code, or look up a cleared device and read the product code on its record.

For information only, not medical, legal or investment advice. Facts about FDA, CMS and SEC rules are current as of the publication date; check the linked official source for changes.

Keep reading